ELECTRICALLY HEATED AGITATING HOT AIR MELTERS
These Agitating Hot Melt Cookers are Gas Free and require a 3 Phase 415 volt power supply to power the indirect heating elements and electric motor. In accordance with the LRWA Hot Melt Code of Best Practice, these Hot Melt Cookers provide agitation (oscilolation) of the molten hot melt to eliminate seperation of the Hot Melt waterproofing materials. Each machine is fitted with an appropriate Residual Current Device (RCD) to prevent electrocution.
OPTIONS
Available as a 1.5 and 3 drum model all machines are supplied serviced, PAT tested and certfied in accordance with the requirements of the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER).
The drums should be emptied at the end of the day so as to prevent Hot Melt materials setting in the drum overnight as this can cause chargable damage to the agitators and/or electric motor on start-up the next day.
HIRE INFORMATION
Hire machines must be returned empty of any Hot Melt material to prevent Hot Melt materials setting in the drum and cause chargeable damage to the agitators and/or electric motor.
All hire machines are on a first come first serve basis, and subject to confirmed availability.
| 1.5 Drum Model | 3 Drum Model | |
|---|---|---|
| Drive | Fully Electric | |
| Chassis | Caster Mounted: 2 x 200mm fixed, 2 x 200mm swivel/braked. Load 500kg per castor |
|
| Power | 415 volt 3 phase - 32 amps (load 20kW) | |
| Plug | 3 pin female neutral & earth into Melter - 3 pin male neutral & earth into power source | |
| Power Lead | 20 metre 415 volt | |
| Control Panel | Digital Temperature Control | |
| Burner | Single Electric heating element | 2 x Electric heating elements |
| Capacity | 1.5 Drum (270 Litres approx) | 3 Drum (540 Litres approx) |
| Agitation | Oscillating continuous paddle | |
| Main Frame | 40 x 40 x 2mm RHS | |
| Pan | 5mm plate | |
| End plates | Profiled 6mm | |
| Outside case sheet | 2mm | |
| Outlet | Profiled 2-piece door and frame | |
| Forklift Locating Sleeves | Formed section from 3mm mild steel sheet. 160mm x 80mm x 5mm RHS |
|
| Drive | 415/30/3 phase motor - gearbox | |
| Insulation | High temperature Rockwool dense slab | |
| Stirrer Shaft | 40mm BMS | 60mm BMS |
| Stirrer Shaft Bearings | 40mm Pillar block | 60mm Pillar blocks |
| Lifting Eyebolts | 4 x M20 metric collared | 4 x M20 metric collared 1.5 ton |
| D Shackles | 4 x 3.25 ton green pin safety | |
| Overall Length | 2520 mm | 2540 mm |
| Width | 870 mm | 1250 mm |
| Overall Height | 1520 mm | 1700 mm |
| Weight | 687 kg | 1063 kg |